Enjoying the Ami after the boot area restoration

After all the work done on the boot area (people in the US call this the trunk) it was time to get a new MOT on the Ami. In Holland cars older than 25 years do have to be checked, but only every two years. The Ami was checked and passed the test so I […]

Fit the rear fenders

The rear fenders Made from polyester can be difficult to fit a way that the gaps are not too wide. I took some time and adjustment to get the them to fit in a decent way on my Ami 8. There are several point to adjust the gaps, but I didn’t want to change anything […]

Rear fenders; original steel or polyester reproduction?

The rear fenders of an Ami 8 are notorious; they seem to be designed to catch dirt and mud and water in all the corners of their pressed and spotwelded sheet metal. The shapes and construction are not ideal in humid conditions. Back in the day, almost every Ami that drove around in our rainy […]

Repaint the repaired areas

After the welding work on the inner fenders, I decided to repaint the boot area and the other repaired spots. Having a clean loading bay in the nice color “Bleu Gentiane” was my goal. Although the color turned out to be not exactly the same as the original internal color, it turned out to be […]

Weld on nuts for the rear seat belts

After welding in the repair panels in the inner fender near the rear doors, I bought two new seat belt bolts and welded them to the thicker outer repair panel that I spotwelded over the remaining metal of the inner fender. It’s not completely as it is originally, but I’m pretty sure it is secure. […]

Weld other small damaged areas

As soon as I unmounted the outer fenders of my Ami 8, there were some additional rusty metal areas visible on the inner fender and c-pillar. I decided to cut these rusty parts out and weld some new metal in.

Cutting, fitting and welding the suspension stop repair panels

The repair panel I bought from Janez Kesmah is big. It consist of a large area of the inner fender shape. But I didn’t want to remove too much existing original metal I cut out the rusted area carefully and tightly. Also, there is a gutter part in the inner fender that is not present […]

Start of the rear end restoration

The boot area of my Ami 8 called “DeKeijzer” already looked a bit suspicious when I bought the car in 2001. A few months ago, I noticed a post on social media from Janez Keshma . He had started the reproduction of this panel. Very good thinking, because in almost every Ami 6, Ami 8 […]

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top